1.5MW/1500kw Gas Generator Set for Industrial Exhaust Gas (High Voltage - 10500V) 50Hz

Product Details
Customization: Available
Output Type: AC Three Phase
Gas Source: Industrial Exhaust Gas
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (28)
Find Similar Products

Basic Info.

Model NO.
LY1600GH-M
Power
>200kW
Standard
Standard
Specification
15000KG
Trademark
Liyu
Origin
China

Product Description

LY1600GH‐M Industrial Gas High Voltage Genset Technical Parameters 50Hz
NOX≤500mg/Nm³1)
Minimum Methane Value: MN80
(LHV)min 2.5kWh/Nm3
(80%CO, 10%CO24%H20.5%O23.5%N2)
The data is for reference only, and the actual data shall be subject to the calculation of gas composition of the project

 
Engine Model LY16V170-M
Engine power2)   kW 1253
Rated rotation speed   r/min 1500
Average effective pressure   MPa 1.42
Exhaust gas temperature   ºC ≤530
Wet exhaust flow   About   kg/h   6543 
Combustion air flow   ±8%   kg/h   5158 
Inlet air temp after intercooling   ±5   ºC   50 
Ventilation volume3)   About   kg/h   37662 
Engine Technical Parameters     
Bore/Stroke       mm   170/195 
Displacement       dm3   70.8 
Average piston speed       m/s   9.75 
Lubricant capacity 4)       dm3   240 
Lubricant consumption rate with 100% load       g/kWh   ≤0.3 
Alternator     
Efficiency 5)       %   95.8 
Energy Balance   LY1600GH-M 
Output electric power 5)       kW   1200 
High temp coolant heat   ±8%   kW   866 
Low temp coolant heat   ±8%   kW   125 
Heat of exhaust gas cooled to 150 ° C   ±8%   kW   631 
Radiated heat from the engine    About   kW   52 
Radiated heat from the alternator   About   kW   53 
Gas consumption   ±5%   kW   3150 
Electrical efficiency       %   38.1 
Thermal efficiency       %   47.5 
Total efficiency       %   85.6 
System Parameters     
Min/Max flow of high temp coolant       m3/h   52/66 
Engine Kvs value 6)       m3/h   46 
 
Flow of low temperature coolant 
     m3/h   40 
Intercooler Kvs value 6)       m3/h   72 
Engine coolant capacity       dm3   151 
Intercooler coolant capacity       dm3   52 
High temp coolant temperature inlet/outlet       ºC   75/89 
Low temp coolant temperature inlet/outlet       ºC   45/49 
 Max exhaust back pressure       kPa   5 
Max pressure drop before the air filter       kPa   0.5 
Gas pressure range       kPa   10±2 
Startup method and battery capacity          Electric startup & DC24V@240Ah
1) Exhaust gas emission: Oxygen content 5%, dry exhaust gas, NOx≤500mg/Nm3
2) Engine power rating is based on ISO 3046/1 standard
3) The amount of ventilation air at Delta T=15K, including the amount of combustion air
4) Piping and lubricant heat exchangers are excluded
5) Frequency 50Hz, voltage 10500V, power factor is 1.0
6) The Kvs value refers to the flow rate with a pressure loss of 1 bar
This data is for reference only and is not intended to be a binding value. Please refer to the information in the technical agreement.
 
 Genset Model     LY1600GH-M
  Dimensions             
  Length       mm   6200 
  Width       mm   1700 
  Height       mm   2700 
  Net weight       kg   15000 
               
  Noise 
Sound power level  Multiplie   Hz   32   63   125   250   500   1000   2000   4000   8000 
Exhaust noise   125   dB(A)   107   144   137   126   114   108   105   105   98 
Unit noise   103   dB(A)   94   95   96   98   99   101   99   106   103 
Exhaust gas noise at 1 meter, ±2.5 dB (A)
Unit side noise at 1 meter, ±1 dB (A)
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier