1MW/1000kw Gas Generator Set for Industrial Exhaust Gas (High Voltage - 10500V) 50Hz

• Customization: Available
• Output Type: AC Three Phase
• Gas Source: Industrial Exhaust Gas
• Model NO.: LY1200GH-M
• Certification: ISO
• Power: ＞200kW
• Standard: Standard
• Specification: 13000KG
• Origin: China

Product Description

LY1200GH‐M Industrial Gas High Voltage Genset Technical Parameters 50Hz
NO_X≤500mg/Nm³¹⁾
Minimum Methane Value: MN90
The data is for reference only, and the actual data shall be subject to the calculation of gas composition of the project.

Engine Model				LY12V170-M
Engine power^2)			kW	940
Rated rotation speed			r/min	1500
Average effective pressure			MPa	1.42
Exhaust gas temperature			ºC	≤500
Wet exhaust flow		About	kg/h	4836
Combustion air flow		±8%	kg/h	3795
Inlet air temp after intercooling		±5	ºC	50
Ventilation volume^3)		About	kg/h	29099
Engine Technical Parameters
Bore/Stroke			mm	170/195
Displacement			dm^3	53.1
Average piston speed			m/s	9.75
Lubricant capacity ^4)			dm^3	180
Lubricant consumption rate with 100% load			g/kWh	≤0.3
Alternator
Efficiency ^5)			%	95.7
Energy Balance				LY1200GH-M
Output electric power ^5)			kW	900
High temp coolant heat	±8%		kW	689
Low temp coolant heat	±8%		kW	104
Heat of exhaust gas cooled to 150 ° C	±8%		kW	420
Radiated heat from the engine	About		kW	52
Radiated heat from the alternator	About		kW	40
Gas consumption	±5%		kW	2369
Electrical efficiency			%	38.0
Thermal efficiency			%	46.8
Total efficiency			%	84.8
System Parameters
Min/Max flow of high temp coolant			m^3/h	40/56
Engine Kvs value ^6)			m^3/h	42
Flow of low temperature coolant			m^3/h	35
Intercooler Kvs value ^6)			m^3/h	30
Engine coolant capacity			dm^3	111
Intercooler coolant capacity			dm^3	28
High temp coolant temperature inlet/outlet			ºC	76/89
Low temp coolant temperature inlet/outlet			ºC	46/49
Max exhaust back pressure			kPa	5
Max pressure drop before the air filter			kPa	0.5
Gas pressure range			kPa	5~15
Startup method and battery capacity				Electric startup & DC24V@240Ah

1) Exhaust gas emission: Oxygen content 5%, dry exhaust gas, NOx≤500mg/Nm³
2) Engine power rating is based on ISO 3046/1 standard
3) The amount of ventilation air at Delta T=15K, including the amount of combustion air
4) Piping and lubricant heat exchangers are excluded
5) Frequency 50Hz, voltage 10500V, power factor is 1.0
6) The Kvs value refers to the flow rate with a pressure loss of 1 bar
This data is for reference only and is not intended to be a binding value. Please refer to the information in the technical agreement.
 

Genset Model											LY1200GH-M
Dimensions
Length								mm			5300
Width								mm			1700
Height								mm			2300
Net weight								kg			13000
Noise
Sound power level	Multiplie	Hz	32	63		125	250		500	1000		2000	4000	8000
Exhaust noise	120	dB(A)	109	115		122	121		118	110		109	107	106
Unit noise	103	dB(A)	96	101		95	96		96	97		96	95	97

Exhaust gas noise at 1 meter, ±2.5 dB (A)
Unit side noise at 1 meter, ±1 dB (A)