2MW/2000kw Gas Generator Set for Industril Exhaust Gas (High Voltage - 10500V) 50Hz

• Customization: Available
• Output Type: AC Three Phase
• Gas Source: Industrial Exhaust Gas
• Model NO.: LY2000GH-M
• Power: ＞200kW
• Standard: Standard
• Specification: 17000KG
• Trademark: Liyu
• Origin: China

Product Description

LY2000GH‐M Industrial Gas High Voltage Genset Technical Parameters 50Hz
NO_X≤500mg/Nm³¹⁾
The data is for reference only, and the actual data shall be subject to the calculation of gas composition of the project
 

Engine Model			LY20V170-M
Engine power^2)		kW	1561
Rated rotation speed		r/min	1500
Average effective pressure		MPa	1.41
Exhaust gas temperature		ºC	≤530
Wet exhaust flow	About	kg/h	8252
Combustion air flow	±8%	kg/h	6201
Inlet air temp after intercooling	±5	ºC	50
Ventilation volume^3)	About	kg/h	43137
Engine Technical Parameters
Bore/Stroke		mm	170/195
Displacement		dm^3	88.5
Average piston speed		m/s	9.75
Lubricant capacity ^4)		dm^3	300
Lubricant consumption rate with 100% load		g/kWh	≤0.3
Alternator
Efficiency ^5)		%	96.1
Energy Balance			LY2000GH-M
Output electric power ^5)	±10%	kW	1500^6)
High temp coolant heat	±8%	kW	1147
Low temp coolant heat	±8%	kW	123
Heat of exhaust gas cooled to 150 ° C	±8%	kW	757
Radiated heat from the engine	About	kW	58
Radiated heat from the alternator	About	kW	61
Gas consumption	±5%	kW	3927
Electrical efficiency		%	38.2
Thermal efficiency		%	48.5
Total efficiency		%	85.7
System Parameters
Min/Max flow of high temp coolant		m^3/h	66/86
Engine Kvs value ^6)		m^3/h	46
Flow of low temperature coolant		m^3/h	50
Intercooler Kvs value ^6)		m^3/h	72
Engine coolant capacity		dm^3	191
Intercooler coolant capacity		dm^3	76
High temp coolant temperature inlet/outlet		ºC	75.5/89
Low temp coolant temperature inlet/outlet		ºC	46.5/49
Max exhaust back pressure		kPa	5
Max pressure drop before the air filter		kPa	0.5
Gas pressure range		kPa	10±2
Startup method and battery capacity			Electric startup & DC24V@240Ah

1) Exhaust gas emission: Oxygen content 5%, dry exhaust gas, NOx≤500mg/Nm³
2) Engine power rating is based on ISO 3046/1 standard
3) The amount of ventilation air at Delta T=15K, including the amount of combustion air
4) Piping and lubricant heat exchangers are excluded
5) Frequency 50Hz, voltage 10500V, power factor is 1.0
6) The Kvs value refers to the flow rate with a pressure loss of 1 bar
This data is for reference only and is not intended to be a binding value. Please refer to the information in the technical agreement.
 

Genset Model											LY2000GH-M
Dimensions
Length					About			mm			6800
Width					About			mm			1700
Height					About			mm			2615
Net weight					About			kg			17000
Noise
Sound power level	Multiplie	Hz	32	63		125	250		500	1000		2000	4000	8000
Exhaust noise	123	dB(A)	118	127		139	120		110	104		97	100	94
Unit noise	112	dB(A)	97	99		109	105		104	104		100	106	106

Exhaust gas noise at 1 meter, ±2.5 dB (A)
Unit side noise at 1 meter, ±1 dB (A)